Connecting Your System; Tv With Motorized System (Diseqc 1.2) - Xcruiser XDSR4000HD User Manual

CONNECTING YOUR SYSTEM

7
There are two ways to connect the
receiver to your existing TV system. We
recommend using one of the following
cases for the best result:
• For HD television set, you should use
a HDMI cable for best result, Plug one
end of the cable into the HDMI socket
on the receiver, and the other end into
the matching socket on your television.
In this case, you do not have to make
11
audio connections because the HDMI
connector can output stereo audio or
Dolby Digital audio.
• Connect RCA cable to the RCA jack on
the back of the receiver and the other
end to a RCA jack on your TV.
Finally connect the coaxial cable from the
LNB of your Dish to the LNB IN jack on
the receiver.
With External Audio / Hi-Fi System
To connect any external Audio Hi-Fi
system, the receiver has been provided
with RCA connector at the back of the
receiver marked with AV OUT.
Connect an RCA cable from the AV OUT
jack on the back of the receiver to the
LINE, AUX, SPARE OR EXTRA input jacks
on your Hi-Fi System.
7.1 TV with Motorized System (DiSEqC
1.2)
Connect one end of your coaxial cable
to the LNB IN connector on the receiver
and the other end to the REC or Receiver
connector on the DiSEqC 1.2 motor.
Connect the coaxial cable from the LNB
to the LNB connector on the DiSEqC 1.2
motor.
All our receivers are designed to be
DiSEqC 1.0 and DiSEqC 1.2 compatible.