Rear Panel - Xcruiser XDSR4000HD User Manual

REAR PANEL

6
Please refer to the diagram above for all
possible connections of your receiver.
Do not connect the unit to the mains
socket until all other connections have
been made and checked.
10
POWER ON/OFF SWITCH: To switch ON/OFF
the receiver power supply.
LNB IN 13/18V 400MA MAX: This port is to
connect the coaxial cable from LNB of
your Dish.
S/PDIF: Digital Audio interface, connect to
AV amplifier S/PDIF input terminal.
HDMI: Audio and Video output socket for
TV set with HDMI Input Jack only.
RS 232C SERIAL PORT: This is used to
connect your receiver to a computer
through a serial cable.
TV: This is used to connect your TV
through SCART cable.
VIDEO OUT: This RCA connector is used to
connect any external video.
AUDIO OUT: These RCA connectors are
used to connect any external audio amp
or system.
USB: USB 2.0 Host, connect to USB hard
disk, flash disk and 3G dongles.
0/12V 50mA:This is used to Connect 12V to
an external 0V/12V switch.
ETHERNET: Network port, you can get a
new software updates from this port.