A/V Control - Xcruiser XDSR4000HD User Manual

11.2 A/V Control

When you enter to "TV System" menu,
you will see the screen like above:
Display Mode is for switching the system
outputting video resolution. Move
highlight on it and press left or right key,
it will switch video resolution circularly
by the sequence "AUTO", "By Native TV",
"480p", "576P", "720P_50", "720P_60,
"1080i_50", "1080i_60", "1080P_50" and
"1080P_60". This effect is equal to press
V.Format Key under Full Screen and their
last setting saving will be effective for
eachother. By Source means system will
set the video output resolution according
to the program it's playing, different
resolution programs switching perhaps
26
will makes TV screen flickering. By Native
TV means system will be according to
the HDMI TV's max supported resolution
to set its resolution, if system is not
connected to a HMDI TV, it will set
resolution to be default
Aspect Mode is for switching the screen
aspect ratio mode. Now we provide these
options: 4:3 PS/ 4:3 LB / 16:9/ Auto. You
can press [Left/Right] key to select each
mode circularly. 16:9 will provide user
pillar box mode it means user use 16:9
TV to display but need to see a 4:3 full
display picture. System will force press
wide screen picture to be narrow and
there're black band on left and right site.
Auto means system won't do any aspect
ration translation, 16:9 picture source will
be good display on a 16:9 TV but will be
too narrow on a 4:3 TV, and 4:3 picture
source will be too wide in a 16:9 TV but
will be good display in a 4:3 TV.
Video Output: Press [Left/Right] to select
RGB or CVBS
Digital Audio Out is for setting the both
SPDIF and HDMI's digital audio output
mode, it has options LPCM Out, Auto.
You can press [Left/Right] Key to select
each mode circularity. LPCM Out means
system will decode no matter AC3 or
PCM audio track data to be LPCM, digital
audio decoder or HDMI TV will get LPCM
digital audio data. Auto means system
will detect which the connected HDMI TV
can decode and then output that data.
If HDMI TV can decode AC3, system just
output RAW data, if HDMI TV can decode
LPCM only, system will just decode AC3
or LPCM to be LPCM and then output.
OSD Transparency: Besides the setting
of "OSD Menu Style", you also can
set the transparency of OSD. You can
press [Volume Up/Volume Down] key
to select the values. There are 5 levels
of transparency, 10%, 20%, 30%, and
40% and "NO" (means no transparency
function).
Brightness/Contrast/ Saturation: You
can adjust the parameter about the
Video image by using the [OK] button or
press [Volume Up/Volume Down] key,
the default value is Level 10.