Erasing A Track (Erase); Erasing All Tracks (All Erase) - JVC NX-DV3 Instructions Manual

(Continued)
Editing Tracks

Erasing a Track (ERASE)

Example: Erasing tune B
CAUTION
• Once you erase a track, you cannot retrieve it.
Before erasing a track, confirm that you no longer
need it.
■While the track you want to erase (track 2 in
the example shown above) is being played
back
1
Press repeatedly to select
"ERASE?".
2
Press .
• You can also select a track number with
, or the number buttons. Refer to
"Using the number buttons" (
3
Press .
• " " is added in front of the selected track
number.
• When you select a wrong track, press
to delete " ".
• You can select up to 15 tracks to be erased
with , or the number buttons, and
. Refer to "Using the number buttons"
( page 19).
4
Press .
5
Confirm that you no longer need
the tracks, and then press
NOTE
• During editing, you can return to the previous step
by pressing . You can quit the editing operation
by pressing .
59
Erasing All Tracks
(ALL ERASE)
CAUTION
• Once you erase a track, you cannot retrieve it.
Before erasing a track, confirm that you no longer
need it.
1
Press
"ALL ERASE?".
2
Press
3
Confirm that you no longer need
all tracks, and then press
NOTE
• You can quit the editing operation by pressing
page 19).
.
For the locations of remote control
buttons, refer to page 55.
All tracks are erased.
repeatedly to select
.
.
Introduction
.