Enjoying Better Pictures (Scan Mode); Playing Back The Bonus Group - JVC NX-DV3 Instructions Manual

(Continued)
Convenient Functions of the DVD Player
Example:
5
Press
value.
6
Press .
• To adjust other items, go back to step 3.
7
Press .
NOTE
• If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
• "VFP" stands for "video fine processor".
Enjoying Better Pictures
(SCAN MODE)
In the progressive mode, you can enjoy better
pictures.
CAUTION
• In order to enjoy pictures in the progressive mode,
the following requirements should be met.
• There must be component video input termi-
nals on the TV set connected to the main unit.
• The main unit and the TV set must be con-
nected using a component video cord
( page 17).
When the above requirements are not satisfied,
leave the main unit in the Interlace mode. If the
progressive mode is set, pictures may be
distorted.
■While the disc is stopped
1
Hold down
seconds.
2
Press or
"PROGRESSIVE" or
"INTERLACE".
3
Press
• It returns to sound source display.
• When the progressive mode is selected, the
display window shows "PROGRESSIVE".
31
to change the
for two or more
to select
Playing Back the Bonus
Group
There are some DVD AUDIO discs with a special
group, called "bonus group", recorded.
• This operation can be carried out when
"BONUS" is lit in the display window on
the main unit.
■While a disc is being played back
1
Set the remote control mode
selector to AUDIO.
2
Press
playback to select a bonus group.
• "KEY_ _ _ _" appears on the TV screen
and in the display window on the main
unit.
3
Press the number buttons to enter
a pin code (4 digits).
• The method of getting a pin code is
different depending on the disc.
4
Press .
• When a correct pin code is entered,
"BONUS" disappears and the playback
of the bonus group starts.
• If an incorrect pin code is entered, try
entering a correct pin code again.
Introduction
repeatedly during