JVC GVT0277-019A Instructions

Enjoying Movies/Music from your iPod
Compatible iPod Models
Video
Tag
iPod model Audio
information
Composite
iPod nano
✓ —
1GB/2GB/4GB
iPod nano (2nd generation)
✓ —
2GB/4GB/8GB
iPod nano (3rd generation)
✓ ✓
4GB/8GB
iPod nano (4th Generation)
✓ ✓
8GB/16GB
iPod mini
✓
—
4GB
iPod mini (2nd Generation)
✓
—
4GB/6GB
iPod with color display
✓ —
20GB/60GB
iPod (Click Wheel)
✓ —
20GB/40GB
iPod classic
✓ ✓
80GB/120GB/160GB
iPod photo
✓ ✓* 1
30GB/40GB/60GB
iPod (5th Generation)
✓ ✓
30GB/60GB/80GB
iPod touch
✓ ✓
8GB/16GB/32GB
iPod touch (2nd Generation)
✓ ✓*
2
8GB/16GB/32GB
1
* Only for still picture.
* 2 To view a video/picture from iPod touch on your TV, update the software to the latest version. (Any additional
charges may apply.) For details about updating iPod, check on the Apple web site <http://www.apple.com>.
GVT0277-019A
Playing Back iPod Devices Repeat play back
• Before viewing a video/picture from iPod on your Press REPEAT to change the repeat playback settings. Press
TV, make the appropriate video setting on iPod. For once for track repeat, twice for repeat all, and once more to
details of the setting, see the instruction manual for cancel. The System displays "REPEAT" only (the icon on the
iPod.
iPod display changes).
• For iPod touch
Operate iPod touch itself in the following cases:
–when operating the home button
–when selecting application icons on the home screen
• Refer to the instruction manual for the iPod for details.
–when dragging the slider
To go back to the previous menu
• When you cannot operate iPod connected through
the unit or using the remote control, operate iPod
itself.
To start / To pause
To select an item on the menu
To forward or reverse skip
While playing...
• To confirm an item on the menu, press "SET. "
To fast-forward or fast-reverse the track
While playing...
(Press and hold)
To connect an iPod
To detatch the dock adaptor from the dock:
Connect an iPod to dock A or B on the unit. You can have 2 Pull up the dock adaptor with your fingernail or sharp
iPod devices connected at the same time.
pointed tool using the slot.
• Be careful not to injure your fingertips or damage the
terminal of the dock.
✓
About charging the battery of iPod
The unit enables users to charge the battery of iPod.
✓
1 Press
2 Select iPod as the source.
3 Press and hold 7 for 2 seconds to start charging.
✓
Dock B
Dock A
• Press and hold 7 to deactivate the battery charging
fuction.
✓
• When 2 iPod devices are connected, both batteries are
charged at the same time.
—
• For details of the battery charging, see the instruction
manual for iPod.
—
—
—
Dock adaptor (supplied with the iPod or
sold separately)
✓
• Make sure the unit is on standby when you connect the
iPod.
—
• When you connect iPod to the dock, make sure the
terminal on the dock is fully inserted into iPod.
✓
• After connecting iPod, wait until the unit is ready for
operation (about 3 seconds).
• Be careful not to damage the terminal on the dock when
✓
connecting / disconnecting the iPod.
• Do not touch or hit the terminals of the dock and of iPod.
✓
It might cause damage to these terminals.
• Always set the volume to the minimum level when
connecting or disconnecting iPod.
• Do not carry the unit with iPod connected. You might drop
it down or it might cause damage to the connector part.
• Remove iPod from the dock when you do not use it.
9
Shuffle Play A B Shuffle
Applies Shuffle Play to iPod A or iPod B selected as the This function enables two iPod devices to play in shuffle
source. Select the desired shuffle mode. mode alternately. You can play a variety of songs from both
iPod devices. When the track of the current iPod source
finishes, a track from the other iPod source will be played
automatically and this cycle repeats.
1 Connect iPod to docks A and B on the unit.
• The shuffle icon lights up on the display of iPod devices.
• Compatible iPod models are the same as those
• To cancel, press again until the shuffle icon disappears.
compatible with Tag information. Refer to "Compatible
iPod Models" on page 9.
2 With both iPod devices connected, press the
SHUFFLE button twice. The unit displays "A ← −
→ B ON" and will start playing a track.
• The iPod indicator (refer to "Display Indicators" in
"Starting up") on the unit is displayed and the current
iPod source icon blinks while playing.
3 To stop A B Shuffle, press the SHUFFLE button
again. The unit displays "A ← − → B OFF" and will
stop playing the track.
• Removing one of the iPod devices from the dock will
also stop A B Shuffle.
• If this function does not work correctly, reconnect the iPod
devices regardless of whether "CONNECTED" is displayed
on the unit.
10
Listening to a Disc/USB Device
To insert a disc
• When using an 8 cm disc, place it on the inner circle of the
disc tray.
To close the disc tray, press 0 again.
To prohibit disc ejection (Child Lock)
to turn on the power of the unit.
When the System is turned on and the disc tray is closed,
press 0 while touching 7 (on the main unit).
To cancel the prohibition, repeat the same procedure.
"UNLOCKED" appears on the display.
To connect a USB device
USB cable (not supplied)
Listening to the Radio
To select the AM tuner interval spacing
1 Select "TUNER AM."
2 Press and hold 7 for 3 seconds (at the main unit)
to switch between 9 kHz or 10 kHz AM tuner
interval spacing.
Tuning in to a Station
While FM or AM is selected...
2 sec.
Frequency starts changing on the display. When a station
(frequency) with sufficient signal strength is tuned in, the
frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step. To manually stop the search, press
either button.
• The ST indicator lights while an FM stereo station with
sufficient signal strength is tuned in.
If the FM reception is poor
The MONO (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The
MONO (monaural) indicator disappears.
Playing Back Program Play/Random Play
• Program Play/Random Play cannot be used for USB.
To start / To pause
Ex:
Canceled
To stop
To exit Program Play or Random Play, press PROGRAM
or RANDOM until PRGM, RND are all off before or after
playback.
PROGRAM—To program the playing order.
• You can arrange the playing order of the tracks/files (up to
99) before you start playback.
• Resume does not work for Program Play.
Resume Play
1 Press PROGRAM button.
The System can store the stop point, and when you start
playback again by pressing CD 6 or USB 6 (even 2 Select tracks/files you want for Program Play using
the number buttons.
while on standby), it starts from the position where you
• For MP3/WMA files:
have stopped—Resume Play.
To stop completely while Resume is activated, press 7 Select a group number, then select a track/file
twice. number.
3 Repeat step 2 until you complete your program.
4 Press 6 to start playback.
To select a group
While playing...
RANDOM—To play all the tracks at random.
Playing Repeatedly
Press REPEAT repeatedly to select Repeat Mode.
• Repeat Mode varies depending on the medias or the files.
To select a track/file REPEAT TRK Repeats the current track/file.
While playing...
REPEAT ALL Repeats all the contents of tracks/files.
Repeats the current group.
REPEAT GRP
REPEAT OFF Canceled.
(PROGRAM mode)
• When you press 4 for the first time, you go back to the
REPEAT STEP Repeats the current track/file.
beginning of the current track/file.
REPEAT ALL Repeats all the programmed tracks/files.
To locate a particular position
REPEAT OFF Canceled.
While playing...
(Press and hold)
To locate an item directly
To select a group:
Press a group number using the number buttons.
To select a track/file:
Press a track/file number using the number buttons.
11
Listening to an External Device
Presetting the Stations To connect an audio player
You can preset 30 FM and 15 AM stations. You can listen to the audio player connected to the AUDIO
IN jack.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for
Stereo mini plug (not supplied)
FM preset stations if it has been selected.
2 Press SET to activate the preset number entry
From audio output
mode.
(or headphone out, etc.)
• Finish the following process while the indication on
the display is flashing.
3 Select a preset number for the station you store
using the number buttons.
4 Press SET to store the station.
• Make sure to turn down the volume on the System to
To tune in to a preset station
minimum level before starting playback.
1 Select the band (FM or AM).
2 Select the preset number using the number
buttons.
To back up a preset station
Press to go back to the standby mode. This memorizes
the preset station you set.
12
Unique File Operations
The operations will vary depending on the discs or files.
To select the audio track
Canceled
Or press number buttons to select the audio track.
You can select the audio channel to listen to.
Display Message
NO DEVICE, NO USB
• No USB device is connected or the connected USB device
is not compatible with this System.
DEVICE ERR
• The unit has failed to read the USB device.
CAN'T PLAY
• Playable format file does not exist in USB device.
To adjust the audio input level
If the sound from the device connected to the AUDIO IN
jack is too loud or too quiet, you can preset the audio input
level through the AUDIO IN jack (without changing the
volume level).
While "AUDIO IN" is selected as the source...
• As the number of the level increases, the preset input level
is increased.