Preferences; Basic Operations; Language; Picture - JVC NX-DV3 Instructions Manual

Preferences

You can change the initial settings of this product
according to the environment the product is used
in.
CAUTION
• Set the remote control mode selector to
AUDIO before using the number buttons.
NOTE
• The top and bottom of the preference screen may
not be displayed on a wide TV. Adjust the picture
size on the TV.

Basic Operations

This section explains basic operation for changing
various settings.
■While a disc is stopped or no disc is loaded
(while "NO DISC" is displayed)
1
Press .
• "SETTING" appears in the display window
on the main unit and the following screen
appears on the TV.
• Proceed with operations by following the
description on the TV screen.
41

LANGUAGE

NOTE
• If the selected language is not recorded on the disc,
the optimum language set for the disc appears.
• For a language code such as "AA", refer to the
"Language Codes" (
Items
MENU LANGUAGE Select the language for the DVD VIDEO menu.
AUDIO LANGUAGE Select the audio language for the DVD VIDEO.
Select the subtitle language for the DVD
SUBTITLE
VIDEO.
ON SCREEN Select the language displayed on the preference
LANGUAGE screens.

PICTURE

Items Contents (
MONITOR Select a display method suitable for your TV.
TYPE 16 : 9 (wide TV):
Select this item when the aspect ratio of your wide
TV is fixed to 16:9 (when playing back a DVD
VIDEO recorded at 4:3, this product automatically
adjusts the screen width of the output signal).
4 : 3 LB (letter box)
Select this item when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the black bars appear on the top and
bottom of the screen.
4 : 3 PS (pan scan):
Select this item when the aspect ratio of your TV is
conventional 4:3. While viewing a wide screen
picture, the left and right edges of the picture will not
be shown on the screen. (If the disc is not
compatible with the pan scan, the picture will be
displayed at the letter box ratio.)
PICTURE Select an item suitable to the video source.
SOURCE
AUTO:
The video source type (a video or film) is
automatically selected.
FILM:
Select this item when you want to view a film or
video recorded with the progressive scan method.
VIDEO:
Select this item when you want to view a normal
video.
SCREEN Select the screen saver mode between
SAVER (screen saver activates when there is no operation
made for about 5 minutes since a still picture was
last displayed).
FILE If a disc includes an
TYPE still picture file (JPEG), select which file is played
back. If you change this setting, open and close the
disc tray, or momentarily turn off the main unit. (A
disc either with audio files or still picture files can be
played back regardless of this setting.)
Introduction
page 43).
Contents
: initial setting)
:
ON /OFF
AUDIO file (MP3/WMA) and a