Recording All Tracks From A Disc To An Md; Quitting Recording - JVC NX-DV3 Instructions Manual

Recording All Tracks from a
Disc to an MD
1
Press , and then press
• The DVD is selected as the sound source
and playback is stopped.
■When recording sound from DVD VIDEOs
• Play back a title or chapter, pause playback,
and then press
ning of the first title/chapter.
• You may not be able to record a DVD
VIDEO depending on the disc.
2
Insert an MD.
• Close the write protect knob on the MD
beforehand (
3
Press to select the MDLP
mode.
• Each time you press
gles as follows.
: For standard stereo recording
(Maximum recording time is 80
minutes with an MD 80).
: For ×2 extended stereo recording
(Maximum recording time is 160
minutes with an MD 80).
: For ×4 extended stereo recording
(Maximum recording time is 320
minutes with an MD 80).
• As you change the MDLP mode
(SP→LP2→LP4), the sound quality also
changes. When you want to record sound at
the best possible quality, select the SP
mode.
• When you use an MD car audio system,
portable MD player or other MD player that
is not compatible with the MDLP mode,
select the SP mode.
4
Press to set group recording.
• Each time you press
as follows.
• You can form or cancel a group after the
recording finishes. (
5
Press to select the recording
speed.
to return to the begin-
page 72).
, the display tog-
, the display toggles
: Activates group
recording (initial
setting).
: Cancels group
recording.
pages 60 and 63)
• Each time you press
as follows.
.
• Select normal speed when you want to play
back a disc other than a CD. If you select
"×5 SPEED" for a disc other than a CD and
press
appears in the display window and record-
ing does not start.
• Recorded sound quality is the same for both
high speed recording and normal speed
recording.
• You cannot listen to the sound during ×5
high speed recording.
6
Press
Example: Display while CD is recorded
• When "HCMS CANNOT COPY" appears,
refer to pages 71 and 73.
NOTE
• The recorded sound level is automatically adjusted.
• The CD rotates at high speed during x5 high
speed recording. Therefore, depending on the
condition of the CD, the sound may be recorded
improperly and affected by noise. If the sound is
not recorded properly, select normal speed
recording.
• The remaining time for recording differs depend-
ing on the selected MDLP mode.
• You cannot record sound while the repeat play-
back function is on. Starting the recording func-
tion automatically cancels repeat playback.
• While recording a DVD video, you cannot make
settings on the DVD including audio, subtitle,
view angles, picture magnification and surround
mode selection.
• During the recording operation, the surround
mode is automatically deselected (
39).

Quitting Recording

Press
, the display toggles
: ×5 high speed recording
(only for CDs)
: Normal speed recording
, "CANNOT REC ×1 REC ONLY"
.
.
page
52