3. Repeat the same setting procedure for
"VIDEO/PHOTO" setting:
4.
and "V" appear on the screen: push the button to choose "V" (Video) or "P" (Photo).
If you have not pushed any buttons for 3 second, "OK" will appear on the screen, indicating it has
automatically saved the current settings. The LCD screen will shut off automatically 10 seconds later.
* On the "P" (photo) setting, Nightwatcher NW700 will take a series of digital photographs at a rate of 3
photos every second when the motion sensor is triggered
①
③
⑤
⑦
Step 4. Viewing video
1. Viewing image by computer through a card reader (see fig. 13)
Press the push button on the bottom of the unit for 3 seconds to disable the unit.
Open the waterproofed cover on the Smart Tracker.
Press OFF/REC button and take it out the Micro SD card within 30 seconds.
To remove Micro SD card, push in Micro SD card to eject then pull out.
When LED light turns green, meaning Micro SD card is being read, do not remove SD card or
data may be lost.
Press the push button on the bottom of the unit to set to normal operational mode.
Technical Specifications
1. Features and specification:
PIR detection angle 210 Deg and detection range up to 10M
MONTH/DATE/HOUR/MINUTE.
when entering this mode, these two icon
②
Start
④
MONTH
Setting
⑥
HOUR
Setting
⑧
VIDEO/
PHOTO
Setting
Fig. 13
YEAR
Setting
DATE
Setting
MINUTE
Setting
Finish
9