Page 1
User Guide Do-It-Yourself Analogue HD CCTV Kit ADCloud Android...
Page 2
4. Appropriate tools for installation. Note: This instruction guide provides basic information on how to install your CCTV system. More technical information is available on our website; www.nightwatcher.co.uk. VIDEO DISPLAY Using a high quality monitor, connect it to the DVR via VGA Cable or HDMI...
Page 3
Monitor with HDMI Input STEP 1. Connect DVR to monitor using HDMI cable STEP 2. Connect monitor to power socket STEP 3. Switch monitor mode to HDMI (if required) TV with BNC Connector (VIDEO IN) STEP 1.Connect DVR to monitor using a BNC- RCA cable STEP 2.Connect monitor to power socket NB: This connection method is only used between...
SETTINGS WIZARD Before turning on your DVR, ensure that all connections are correctly installed. POWER ON AND LOGIN Connect the DVR with the power supply to start-up. The light labelled POWER on the front bezel will illuminate. After the DVR start-up, a Wizard Setting panel displays to choose your required settings, including language, date format, time format, time zone, system date &...
CHANGING DISPLAY RESOLUTION Optimize the DVR Video output to match the monitor output, using the following steps: NB: Make sure the monitor supports the same resolution as your DVR output resolution, otherwise the monitor will be unable to display the video. STEP 1.
Page 6
PLAYBACK Go to system Main Menu--Search, view the following screen. Fast Multi-screen display Play/Pause Forward Rewind Previous Single-screen Next frame frame display Previous Record Next Record Previous Record: Move to last recorded event Next Record: Move to next recorded event Fast Forward: video can be played at different speeds, from x1, x4 to x16 speed.
Page 7
UPGRADE Access the website to check for any DVR software upgrades an carefully follow instructions provided. STEP 3 Restart the DVR (Power off and on), DVR STEP 1 Copy the software upgrade to a USB drive software will be upgraded automatically. ensuring it is in the root directory, as shown below.
Page 8
How to test your DVR's network ? Step 2 Note: Before monitoring via smartphone or (1) Right click Mouse - Main menu - Set up - Network computer, please ensure (2) Tick 'Obtain IP address automatically' your DVR is connected to (3) Click Test, if 'OK' is displayed, the network is connected successfully.
Add Device Login to the app, select the main interface (My Device), click”+”in the upper right corner, three different options of device addition are available. My Device Select Addition Method Device Addition 1.Manual Addition ● Choose device type ● Input Device ID manually ●...
3).Q:Why is it not possible to locate a recorded clip A:Please check, ● If HDD is working normally ● If the search period is valid ● If the device system time is correct Can We Help You? Call us: 0345 900 6764 (local rate call) www.nightwatcher.co.uk...