Set The Date And Time Of Nightwatcher - NightWatcher NW700 User Manual

Step 2. Recording Audio Messages (see fig. 10)
Recording:
1. Press the SET/REC button for 3 seconds, and you will hear a single beep. After the beep, start
recording your message by talking into the microphone (see fig. 10). Push the button again to stop
recording, and you will hear a series of 2 beeps, meaning the recording is finished. If you do not
push the button again after you have recorded the message, the recording will stop automatically
after 10 seconds.
2. Nightwatcher NW700 can hold 2 self-recorded messages. If you have recorded one message,
repeat above step for message 2.
3. If you hear a series of 3 beeps when you want to record your message by pressing the SET/REC
button for 3 seconds, this means the self-recorded messages are full, please erase previous
messages.
Play/Erase : allows you to listen to and erase messages
1. If you have only recorded 1 message, push the button one time to listen to recorded Message 1. If
you wish to erase it, press the PLAY/ERASE button and hold it for 3 seconds. You will hear a
series of 2 beeps, indicating the message has been erased.
2. If you have recorded 2 messages, push the button one time to listen to the first message, and push it
again to listen to the second message. If you want to erase a message, select that message, and after
listening to it, push the PLAY/ERASE button and hold it for 3 seconds to erase it.
3. If message 1 is erased, message 2 will automatically become message 1. The next message you
record will then become the new message 2.
Step 3. Set the Data and Time
This will allow the security video taken by Nightwatcher NW700 to display the correct date and time
it was taken.
1. Push TIME/DATE SET button (see fig. 12) for 3 seconds, LCD screen will flash 3 times indicating you
have entered Time/Date setting mode.
2. "YEAR" setting："Y" and "08" are displayed on the screen；push the button to set year from"08-99",
push the button again and hold for 3 seconds to scroll through numbers quickly. If you have not pressed
the button for 3 seconds, it will automatically save the year and go on to allow you to set the month.
Note: Time must be set on the unit or it will not record.
：
TIME/DATE SET
OFF/REC
LCD
Fig. 12
8
(see fig. 10)