General Information And Safety; Fcc Information - NightWatcher NW700 User Manual

Nw700 nightwatcher
Hide thumbs Also See for NW700:
Table of Contents

Advertisement

Records 20 seconds image recording for image stream: 10fps at 480 x 640 Pixels
Built in Micro SD card slot for Micro SD memory card
Micro SD card slot for additional storage, max memory size up to 2G
Micro SD card spec.: FAT
Automatic exposure control, white balance and sharpness
Effective viewing angle:60 deg
Effective viewing distance: 8M
Image format: JPEG AVI File
Powered by AC 220V to 240V 50Hz
8pcs 1W Liteon super power white LED
Auto light sensor.
Lifetime of stepper motor: 20,000 times turning
IP55
Suitable for outdoors permanent use.
Tested to the relevant AS/NZS standards

General Information and safety

Special care instructions!
The Nightwatcher NW700 is designed to be weather resistant (IP55). Never attempt to immerse the
unit in water or any other liquid. This will damage the unit and void the warranty.
This product is designed to illuminate, video, and make verbal announcements. It will not prevent the
commission of any act, legal or illegal. The manufacturer assumes no liability for any damage to
property, injury to person, or death.
Use a soft lens cloth for cleaning lens. Avoid touching lens with fingers.
Remove dirt or stains with a soft cloth dampened with water or neutral detergent. Keep the
Nightwatcher NW700 in a dry and cool dust-free environment or container when it is NOT used
Do not open the Nightwatcher NW700 for unauthorized service. This could cause serious damage to
the unit and will void the warranty.
This Nightwatcher is a precision electronic device. Do not attempt to service this camera yourself, as
opening or removing covers may expose you to the danger of electric shock or other risks.

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
Warning: Changes or modification to this unit not expressly approved by the party responsible ofr
compliance could void the user's authority to operate the equipment.
NOTE: This equipment as been tested and found to comply with the limited for Class B digital device,
pursuant to Part 15 of the FCC Rules. Their limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
10

Advertisement

Table of Contents
loading

Table of Contents