NightWatcher NW700 User Manual
  1. Manuals
  2. Brands
  3. NightWatcher Manuals
  4. Security System
  5. NW700
  6. User manual

NightWatcher NW700 User Manual

Nw700 nightwatcher
Hide thumbs Also See for NW700:

Advertisement

Table of Contents

See also: User Manual
1

Advertisement

Table of Contents
loading

Related Manuals for NightWatcher NW700

Summary of Contents for NightWatcher NW700

  • Page 2: Table Of Contents

    2. Nightwatcher NW700 Overview Page 3 3. Installation Page 3 4. Programming Your Nightwatcher Page 6 5. Set the Date and Time of Nightwatcher Page 8 6. Viewing Video Page 9 7. Technical Specifications Page 9 8. General Information and Safety Page 10 9.

  • Page 3: Nightwatcher Nw700 Overview

    Step 1. Insert/remove Micro SD card (see fig. 1): If the Nightwatcher is powered, press the push-button on the bottom of the unit for 3 seconds to stop the light turning before attempting to insert or remove Micro SD card and the hidden LED will flash in orange.
  • Page 4 ELECTRIC SHOCK. IF YOU ARE NOT SURE, PLEASE CONTACT A QUALIFIED ELECRTCIAN. * NOTE; IT IS RECOMMENDED YOU MOUNT THE NIGHTWATCHER NW700 1.8-2.1M ABOVE THE GROUND FOR OPTIMUM PERFORMANCE, DO NOT MOUNT THE FIXTURE BELOW 1.2M. SEE BELOW FIGURE FOR DETAILS OF PERFORMANCE RANGE.
  • Page 5 Installing your Nightwatcher NW700 on surface. (see fig. 4 & fig. 5) 1. Place plastic masonry plugs into desired surface aligning holes as shown below. Using a screwdriver, fasten mounting plate directly to surface using screws E. 2. Feed the cable through the back mounting box and bush the cable entry to avoid abrasion to the cable.

  • Page 6: Programming Your Nightwatcher

    * Before removing Micro SD card from the slot, please press the push-button on the bottom of the Nightwatcher NW700 for 3 seconds to stop the light turning – the LED will flash orange. To resume working, push the push-button again.
  • Page 7 Note: The LED flashes in orange light continuously indicating the stepper motor of Nightwatcher NW700 is now in abnormal status, the light may stop turning automatically. Please simply switch off /on the main power to resume the Smart Tracker. Below are the possible abnormal situations: - External force: the light head is blocked by objects or is blown by strong wind and is unable to turn properly.

  • Page 8: Set The Date And Time Of Nightwatcher

    ： Step 3. Set the Data and Time This will allow the security video taken by Nightwatcher NW700 to display the correct date and time it was taken. Note: Time must be set on the unit or it will not record.

  • Page 9: Viewing Video

    The LCD screen will shut off automatically 10 seconds later. * On the “P” (photo) setting, Nightwatcher NW700 will take a series of digital photographs at a rate of 3 photos every second when the motion sensor is triggered ①...

  • Page 10: General Information And Safety

    Remove dirt or stains with a soft cloth dampened with water or neutral detergent. Keep the Nightwatcher NW700 in a dry and cool dust-free environment or container when it is NOT used Do not open the Nightwatcher NW700 for unauthorized service. This could cause serious damage to the unit and will void the warranty.

  • Page 11: Frequently Asked Questions

    Q. What happens when the card is full? A: Nightwatcher NW700 will automatically return to the oldest file and save over it each time a new video clip is stored. That means you don’t have to take out the SD card unless you wish to review or save the video files.

Table of Contents