NightWatcher NW700 User Manual page 7

Reset button: restore functions to default settings
1) Press RESET button once each time you turn on unit.
2) In case of system malfunction, please press once.
OFF/REC: Please press OFF/REC button to remove Micro SD card. Please remove card within
30 seconds of pressing the OFF/REC button to avoid loss of data.
* Note: you must press the push button on the bottom of the unit for 3 seconds to disable unit first.
Audio mode: for selecting which audio message will play when motion sensor detects movement.
- Pre-set default is "silent mode"
- Push once for "doorbell chime"
- Push again for "dog barking"
- Push once more for the message you recorded (Message 1)
- Push again for additional message you recorded (Message 2 - you can record up to 2 messages at
a time)
OFF/REC
TIME/DATE SET
Fig. 9
Note:
The LED flashes in orange light continuously indicating the stepper motor of Nightwatcher NW700 is now in abnormal status, the light
may stop turning automatically. Please simply switch off /on the main power to resume the Smart Tracker. Below are the possible
abnormal situations:
- External force: the light head is blocked by objects or is blown by strong wind and is unable to turn properly. The hidden LED
indicator will flash in orange to signal users the abnormal situation.
- Stepper motor: when stepper motor is going to be out of its lifetime or is damaged, the hidden LED indicator will flash in orange to
signal users the abnormal situation.
* If the stepper motor stops working due to lifetime limit, the Nightwatcher becomes a regular motion sensor security light.
Fig. 8
Camera LED indicator
RESET
Right 70
Left 70
this
AUDIO MODE
SET/REC
PLAY/ERASE
MIC
Fig. 10
Fig. 11
Hidden LED Indicator
7