Ford 1998 Windstar Owner's Manual page 44

High-Level Audio System
Ford's High-Level Audio System delivers quality performance
for maximum listening enjoyment.
Using the Controls on Your New Radio
How to turn the radio on and off
Press the "POWER" button to turn the radio on. Press it again
to turn it off.
How to adjust the volume
Press the ( / ) side of the "VOL" button to increase/decrease
the volume. Bars illuminate in the display to show the relative
volume level.
NOTE: If the volume level is set above a certain listening
level when the ignition switch is turned off, when the
ignition switch is turned back on, the volume will
come back to a "nominal" listening level. However, if
the radio power is turned off, the volume will remain
in the position it was set at when radio power was
switched off.
Selecting the AM or FM frequency band
Push the "AM/FM" button to select the desired frequency band.
When in the radio mode, pushing the button more than once
will alternate between AM, FM1 and FM2. These functions are
used with the station memory buttons described under How to
Tune Radio Stations.
How to tune radio stations
There are four ways for you to tune in a particular station. You
can manually locate the station using the "SCAN/TUNE"
button, "SEEK" the station, "SCAN" to the station or select the
station by using the memory buttons, which you can set to any
desired frequency. These four methods are described below.
Electronic Sound Systems
43