Drive Belt/Brake Shoe/Brake System - KYMCO MXU 50 REVERSE Service Manual

3
. INSPECTION/ADJUSTMENT
ATV 50
DRIVE BELT
Remove the left crankcase cover.
Inspect the drive belt for cracks, scaling,
chipping or excessive wear.
Measure the V-belt width
Service limit: 16.5mm (0.7 in)
Replace the drive belt if out of specification.
Drive Belt
Wear Indicator
BRAKE SHOE
Replace the brake shoes if the arrow on the
wear indicator plate aligns with the punch
mark on the brake panel when the brake is
fully applied.
Punch Mark
BRAKE SYSTEM
FRONT BRAKE
Measure the front brake lever free play.
Free Play: 10～20 mm (0.4 – 0.8 in)
Adjust if out of specification.
3-10