Front brake shoe inspection
The checking of brake shoe wear will
disassemble the brake. If the lining thickness
below to the wear limit 2.0mm (0.08in), to
replace the shoes as a set. These procedures
should be performed by KYMCO dealer.
(1) Lining
(A) Lining thickness
(A)
(1)
Rear brake pads inspection
A wear indicator is provided on each brake. The
indicators allows checking of brake pads wear.
Check the position of the indicator. If the
indicator reaches the wear limit line, ask a
KYMCO dealer to replace the pads.
(1) Wear indicator
109
(1)
(2) Rear brake
(2)