Caruretor Installation - KYMCO MXU 50 REVERSE Service Manual

5
. FUEL SYSTEM
CARBURETOR INSTALLATION
When installation, do not allow foreign
particles to enter the carburetor.
Check the carburetor insulator and O-ring
for wear or damage.
Install the carburetor and insulator onto the
intake manifold and tighten the two lock
nuts.
Connect the fuel tube and auto bystarter wire
connector.
Route the auto bystarter wire correctly
and properly.
Install the carburetor cap. ( 5-3)
Install the fuel tube
Install the air cleaner onto the carburetor and
tighten the band screw.
5-11
Carburetor Cap Fuel Tube
ATV 50
O-rings
Insulator
Nuts
Band