Engine Removal - KYMCO MXU 50 REVERSE Service Manual

6
. ENGINE REMOVAL/INSTALLATION

ENGINE REMOVAL

Remove the frame covers (see chapter 2).
Remove the exhaust muffler (see chapter 2).
Remove the oil tank (see chapter 4)
Remove the fuel tank (see chapter 5).
Remove the two bolts attaching the air
cleaner case.
Loosen the band between the air cleaner and
carburetor to remove the air cleaner case.
Remove the carburetor cap.
Disconnect the auto bystarter, A.C.
generator/pulser and starter motor wire
connectors.
Band
Carburetor Cap
A.C.Generator/Pulser Wire Connector
MX'ER 50
Auto Bystarter
Wire Connector
A.C.Generator Wire Connectors
MXU 50 REVERSE
MXU 50
Pulser Wire Connectors
ATV 50
Bolts
Starter Motor
Wire Connector
6-2