Lubrication System; Oil Pump Installation - KYMCO MXU 50 REVERSE Service Manual

4

. LUBRICATION SYSTEM

OIL PUMP INSTALLATION

• Lubricate the O-ring with grease or
engine oil before installation.
• Make sure that the oil pump is inserted
into the crankcase.
• Apply molybdenum disulfide or
grease to the pump pinion.
Install the oil pump onto the crankcase.
Install the oil pump control cable plate.
Connect the oil inlet line and oil outlet line
properly.
Connect the oil pump control cable.
Bleed air from the oil pump.
Bolts
Grease or Engine Oil
Nut
Oil Outlet Line
Oil Pump Driven Gear
Oil Inlet Line
ATV 50
Control Cable
4-4