User Preferences Default Parameters - Motorola Symbol LS9208 Product Reference Manual

User Preferences Default Parameters

Table 4-1 lists the defaults for user preferences parameters. If you wish to change any
option, scan the appropriate bar code(s) provided in the User Preferences section
beginning on page 4-5.
Note: See
preferences, hosts, symbologies, and miscellaneous default
parameters.
User Preferences
Set Default Parameter
Beeper Tone
Beeper Volume
Volume Change Trigger Delay
Laser On Time
Beep After Good Decode
Low Power Blink
Scan Pattern Mode
Single-Line Aim Duration
Time-out Between Same Symbol
Time-out Between Different Symbols
Time Delay to Low Power Mode
Appendix A, Standard Default Parameters
Table 4-1. User Preferences Default Table
Parameter
for all user
Default
All Defaults
High
High
5.0 Sec
3.0 Sec
Enable
Blink
Rastering
2 sec
0.6 sec
0.2 sec
30 Minutes
User Preferences
Page
Number
4-5
4-6
4-7
4-8
4-9
4-10
4-11
4-12
4-13
4-15
4-15
4-16
4-3