Low Power Blink - Motorola Symbol LS9208 Product Reference Manual

User Preferences

Low Power Blink

After a period of inactivity, the scanner will go into a reduced power mode. This parameter
controls how aggressively power is conserved, and therefore determines the method of
waking the scanner up.
If "Low Power - Blink Mode" is selected, then the scanner (after a period of inactivity) will
blink infrequently to save power. To restore the scanner to full power mode, the user must
simply use the scanner by presenting a barcode.
If "Motor and Laser Shut Down" is selected, then the scanner (after a period of inactivity)
will turn off the motor and laser, but leave the green Power LED lit. The user must then
depress the trigger to awaken the scanner to its full power mode.
*
Low Power - Blink Mode
Low Power - Shut Down
4-11