Wand Emulation Default Parameters
Table 9-1
lists the defaults for Wand Emulation host types. If you wish to change any option,
scan the appropriate bar code(s) provided in the Wand Emulation Host Parameters section
beginning on page 9-4.
Note: See
preferences, hosts, symbologies, and miscellaneous default
parameters.
Wand Emulation Host Parameters
Wand Emulation Host Types
Leading Margin
Polarity
Ignore Unknown Characters
Convert All Bar Codes to Code 39
Convert Code 39 to Full ASCII
1
User selection is required to configure this interface and this is the most common selection.
Appendix A, Standard Default Parameters
Table 9-1. Wand Emulation Default Table
Parameter
Wand Emulation Interface
for all user
Default
Symbol OmniLink
1
Interface Controller
80 msec
Bar High/Margin Low
Send Bar Codes
Disable
Disable
Page
Number
9-4
9-5
9-6
9-7
9-8
9-9
9-3