Single-Line Aim Duration - Motorola Symbol LS9208 Product Reference Manual

User Preferences

Single-Line Aim Duration

The Symbol LS9208 can enter the single-line scan mode by tapping the trigger. Once in
this mode, each trigger pull will attempt to decode the barcode in front of the scanner. After
a period of inactivity while the trigger is not pressed, the scanner will revert to the
omnidirectional pattern.
This parameter controls the length of the period of inactivity in single-line mode before the
scanner reverts to the omnidirectional pattern.
*Aim Duration 2 sec
Aim Duration 3 sec
4-13