Chapter Iv - Setup And Installation; Machine Setup; Before Powering Up The Machine - GCC Technologies LaserPro SmartCut X380 Series User Manual

Chapter IV - Setup and Installation

4.1 Machine Setup

4.1.1 Before Powering Up the Machine

Connect the water hoses between the machine and the water chiller. Make
sure the hoses are connected correctly with the right water flow directions.
- 20 -
SmartCut X380 User Manual
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | sales@jorlink.com | www.JORLINK.com