Chapter Ii - Unpacking & Contents; Unloading And Unpacking - GCC Technologies LaserPro SmartCut X380 Series User Manual

Chapter II - Unpacking & Contents

2.1 Unloading and Unpacking

The LaserPro SmartCut X380 is shipped in one crate that contains the machine, the software,
and all of the necessary accessories. The following section contains detailed step-by-step
instructions for unpacking and assembly of the machine.
WARNING
To prevent personal injury or damage to the machine, please obtain assistance when
loading and unloading the shipping crate.
Please save the original shipping crate. If the machine must be returned for product
servicing, it will need to be packed in its original shipping crate.
Unpack via the following steps:
1) Move the shipping crate near the designated work area.
2) Unscrew the screws fastening the top board and remove the top board.
3) Unscrew the screws fastening the sideboards for each side and remove each sideboard.
Distributed & Supported by: Jorlink USA, Inc. | Tel: (336) 288-1613 | sales@jorlink.com | www.JORLINK.com
NOTE
- 9 -
SmartCut X380 User Manual