Personal Protective Gear - Wacker Neuson BTS 1030L3 Operator's Manual

4.2.7
4.2.8
4.2.9
4.2.10 Some dust created by power sanding sawing, grinding, drilling, and
∗
∗
∗
4.3

Personal protective gear

4.3.1
4.3.2
4.3.3
SV00080en.fm
Never operate the machine under the influence of alcohol, drugs, med-
ication or other substances that can impair your vision, coordination
and judgment.
2
When working with highly flammable vegetation and in dry conditions
ensure that a fire extinguisher is readily available for use (danger of
fire).
Asbestos or materials that could discharge toxins may only be cut us-
ing the proper safety measures and after notifying the responsible au-
thorities and under their supervision or that of persons charged with
this duty. The use of dust bonding devices is strongly recommended.
other construction activities contains chemicals known (to the State of
California) to cause cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
lead from lead-based paints,
crystalline silica from bricks and cement and other masonry products
arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do
this type of work.
To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
Wear and use the following protective equipment and devices to pre-
vent head, eye, hand and foot injuries as well as hearing damage.
Clothing should be appropriate, i.e. should be close-fitting but not re-
strict your movement. When cutting metal, do not wear clothing in
which grains of material can be caught (pants with cuffs, jackets or
pants with open pockets, etc.).
Do not wear jewelry or clothing that can become entangled or distract
the operator from the cutting process.
17
Safety information