Scope of delivery/Symbols
3.
Scope of delivery/Symbols
3.1
Scope of delivery
3.2
Symbols
You will find the following symbols on the machine and when reading the
operator's manual:
T01125en.fm
1. Cut-off saw
3. Combination wrench 13/19 mm
4. Offset screwdriver
5. Screwdriver for setting the carburetor
6. Operator's manual (without illustration)
If any of the components listed here is not included with delivery,
please contact your salesperson!
Read the operator's manual
and observe the warnings
and safety information
Use extra caution!
14
Multifunction switch
Start/Stop (I/O), choke
Locked / Unlocked