Advanced Settings - Remote Access Configuration - Kontron KTQ45/Flex User Manual

KTD-00782-H
6.6.10 Advanced settings – Remote Access Configuration
BIOS SETUP UTILITY
Advanced
Configure Remote Access type and parameters
Remote Access
Serial port number
Base Address, IRQ
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
VT-UTF8 Combo Key Support
Sredir Memory Display Delay
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Feature
Remote Access
Serial port number
Serial Port Mode
Flow Control
Redirection After BIOS POST
Terminal Type
VT.UTF8 Combo Key Support
Sredir Memory Display Delay
KTQ45 family
[Enabled]
[COM1]
[3F8h, 4]
[115200 8,n,1]
[None]
[Always]
[ANSI]
[Enabled]
[No Delay]
Options Description
Disabled When Enabled then a remote PC can via one of the
Enabled serial ports behave like a TTY terminal, so that
keyboard and monitor (in a terminal window) is
emulated by the remote PC. As remote PC terminal
program the Windows Hyperterminal can be used.
COM1 Setup which comport that should be used for
COM2 communication
115200 8 n 1 Select the serial port speed
57600 8 n 1
38400 8 n 1
19200 8 n 1
9600 8 n 1
None Select Flow Control for serial port
Hardware
Software
Disabled How long shall the BIOS send the picture over the
Boot Loader serial port
Always
ANSI
Select the target terminal type
VT100
VT-UTF8
Enabled Enable VT-UTF8 Combination Key Support for
Disabled ANSI/VT100 terminals
No Delay Gives the delay in seconds to display memory
Delay 1 Sec information
Delay 2 Sec
Delay 4 Sec
Page 72 of 92
Select Remote
type.
<-> Select Screen
|| Select Item
+- change option
F1 General Help
F10 Save and Exit
ESC Exit
Access