Table of Contents
Advertisement
Place your food in the cold cooking compartment. Place the
ovenware in the centre of the wire rack at level 1.
Press the
button.
Þ
1.
The display suggests "MicroCombi, gentle", 180 °C. If you
require "MicroCombi, intensive", turn the rotary selector.
"MicroCombi, intensive, 200 °C" appears.
Use the
button to switch to the temperature and set the
X
2.
temperature using the rotary selector.
Press the
0
button and switch to cooking time by turning the
3.
rotary selector.
A cooking time of 20:00 minutes is suggested.
Combination
This involves the simultaneous operation of one type of heating
with the microwave. Using the microwave makes your meals
ready more quickly, and they are still nicely browned. You can
set a cooking time of up to 1 hour 30 minutes.
Suitable types of heating
3D hot air
■
Hot air
■
Top/bottom heating
■
Hot air grilling
■
Grill, large area
■
Grill, small area
■
Suitable microwave power settings
Except for 900 watts, you can combine any microwave power
setting with a heating type.
Setting a combination
Example in diagram: Top/bottom heating setting 200 °C and
microwave setting 360 W, 17 minutes.
Press the
button.
!
1.
"Types of heating" appears as the heading. 3D hot air and
160 °C are suggested in the display.
Turn the rotary selector to set the desired type of heating.
2.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
ƒ&
Press the
button to switch to the temperature.
X
3.
Use the rotary selector to change the temperature.
4.
7\SHV RI KHDWLQJ
7RSERWWRP KHDWLQJ
ƒ&
Press the
X
button and set the cooking time using the
4.
rotary selector.
Press the
button.
0
5.
Start with the
button.
n
6.
You can see the cooking time counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
Press the button for the microwave power setting you require.
5.
The selected button lights up. The heading changes to
"Combination".
&RPELQDWLRQ
ƒ&
PLQ VHF
Set the cooking time using the rotary selector.
6.
&RPELQDWLRQ
ƒ&
PLQ VHF
Press the
n
button.
7.
7RSERWWRP KHDWLQJ
ƒ&
Appliance operation begins. You can see the cooking time
counting down in the status bar.
The cooking time has elapsed
A signal sounds. Operation has finished. The status bar shows
00:00:00. You can cancel the signal before it has finished
sounding by pressing the
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the cooking time
Press the
button and switch to cooking time by turning the
0
rotary selector. Press the
X
to change the cooking time. Press the
Opening the oven door during cooking
Operation is suspended. The oven is paused. The
flashes on the status bar. Close the door and press the
button again. The programme will then continue.
button.
0
button.
0
button and turn the rotary selector
button.
0
n
symbol
n
11
Advertisement
Table of Contents
