Dialog Level; Surround Parameter; Subwoofer Level - Marantz NR1604 Owner's Manual

Dialog Level

Sets the output level to clarify the dialogue output from the center channel.
Setting items
Level –12dB – +12dB (0dB)

Subwoofer Level

This setting adjusts the volume level for the subwoofer.
Setting items
Subwoofer On : The subwoofer is used.
Turn subwoofer output on Off : The subwoofer is not used.
and off.
NOTE
This can be set when the sound mode is "DIRECT" and "PURE
DIRECT" (vpage
"LFE+Main".
Subwoofer Level –12dB – +12dB (0dB)
This setting adjusts the
volume level for the
subwoofer.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
72) and the "Subwoofer Mode" (vpage

Surround Parameter

You can adjust the surround audio sound field effects to match your preferences.
The items (parameters) that can be adjusted depend on the signal being input and the currently set
sound mode. For details on the adjustable parameters, see "Sound modes and surround parameters"
(vpage 144).
NOTE
• Some setting items cannot be set while playback is stopped. Make the settings during playback.
• When the sound mode is "PURE DIRECT", you cannot set the surround parameters.
Setting items
Home Theater EQ On : "Home Theater EQ" is used.
Gently softens the upper Off : "Home Theater EQ" is not used.
treble range of movie
soundtracks to reduce
possible harshness and
improve clarity.
126) is
Loudness Management On : Outputs using the settings made in "Dynamic Compression" and
This can be set in the "Dialogue Normalization" (vpage 134) are enabled.
Off : "Dynamic Compression" settings and "Dialogue Normalization" are
Dolby TrueHD mode.
This sets whether to disabled, and the signals on the disk are output as is.
output as specified in
"Dynamic Compression"
or output directly without
compressing the dynamic
range of audio recorded in
the disc.
Dynamic Compression Auto : Automatic dynamic range compression on/off control according to
Compress dynamic range source.
(difference between loud Low / Medium / High : These set the compression level.
Off : Dynamic range compression is always off.
and soft sounds).
109
Default settings are underlined.
Setting details
You can set "Auto" only for the Dolby TrueHD source.
Audio
v See overleaf