Picture Adjust; Hdmi Setup - Marantz NR1604 Owner's Manual

Picture Adjust

Picture quality can be adjusted.
We recommend leaving the settings unchanged from the default settings. First adjust the display image
quality on your TV, and use this menu only when you want to make fine adjustments.
• This item can be set when the input source is CBL/SAT
NETWORK .
MEDIA PLAYER iPod/USB
• Can be set when the "Video Conversion" setting (vpage 116) is "On".
• "TV AUDIO" or "CD" can be set when "HDMI", "COMP" or "VIDEO" (vpage 120, 121) has been
assigned.
Setting items
Picture Mode Standard : The standard mode suited for most living room viewing
Select the desired picture environments.
mode according to the video Movie : A mode suited for watching movies in a dark room such as a
content and your viewing theater room.
Vivid : A mode that makes graphic images for games, etc. brighter and
environment.
more vivid.
Streaming : A mode suited for low bit rate video sources.
Custom : Adjusts the picture quality manually.
Off : No picture quality adjustment is done with this unit.
• You can also press
(vpage 68) in the option menu.
• The default settings are as follows.
• For "NETWORK" and "iPod/USB" input sources : Streaming
• For input sources other than "Network" and "iPod/USB" : Off
Contrast –6 – +6 (0)
Adjust picture contrast.
"Contrast" can be set when "Picture Mode" is set to "Custom".
Brightness 0 – +12
Adjust picture brightness.
"Brightness" can be set when "Picture Mode" is set to "Custom".
Saturation –6 – +6 (0)
Adjust picture chroma level
"Saturation" can be set when "Picture Mode" is set to "Custom".
(color saturation).
Hue –6 – +6 (0)
Adjust green and red
"Hue" can be set when "Picture Mode" is set to "Custom".
balance. Also called Tint.
DVD
Default settings are underlined.
DVD Blu-ray GAME AUX1
Setting details
OPTION
to make these settings from "Picture Mode"
Setting items
Noise Reduction Low / Medium / High / Off
Reduce overall video noise.
Enhancer 0 – +12
AUX2
Emphasize picture
sharpness.
• "Picture Adjust" can not be set when 4K signals are input.
• "Picture Adjust" can not be set when component video and video signals are output.

HDMI Setup

Make settings for HDMI video/audio output.
Setting items
Auto Lip Sync On : Compensated.
Off : Not compensated.
Make automatic
compensation for timing
shift in audio and video
output.
HDMI Audio Out AVR : Play back through speakers connected to the unit.
TV : Play back through TV connected to the unit.
Select HDMI audio output
device.
• The audio signal input from the HDMI input connector can be output as
an output signal from the HDMI output connector by setting the HDMI
audio output destination to TV.
• When the HDMI control function is activated, priority is given to the TV
audio setting
• When the power of this unit is on and "HDMI Audio Out" is set to "TV",
audio is output as 2-channel from the HDMI OUT connector.
HDMI Pass Through On : Passes the selected HDMI input through the AV receiver's HDMI
Selects how the AV receiver output when the AV receiver is in standby power mode.
will pass HDMI signals to Off : No HDMI signals are passed through the AV receiver's HDMI output
the HDMI output in standby in standby power mode.
power mode.
NOTE
When "HDMI Pass Through" is set to "On", it consumes more
standby power. If you are not using this unit for an extended period, it
is recommended that you unplug the power cord from the power outlet.
115
Setting details
"Noise Reduction" can be set when "Picture Mode" is set to
"Custom".
"Enhancer" can be set when "Picture Mode" is set to "Custom".
Default settings are underlined.
Setting details
(vpage 95 "HDMI control function").
Video
v See overleaf