Connecting An External Control Device - Marantz NR1604 Owner's Manual

Connecting an external control device

DC OUT jack
When a device with DC IN jack is connected, the connected device's power on/standby can be controlled
through linked operation to this unit.
The DC OUT jack outputs a maximum 12 V/150 mA electrical signal.
12 V/150 mA trigger-compatible device
NOTE
• Use the monaural mini-plug cable for connecting DC OUT jacks. Do not use the stereo mini-plug cable.
• If the permissible trigger input level for the connected device is larger than 12 V/150 mA, or has shorted,
the DC OUT jack cannot be used. In this case, turn off the power to the unit, and disconnect it.
DVD
94