Specifications - Marantz NR1604 Owner's Manual

Specifications

n Audio section
• Power amplifier
Rated output: Front:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Center:
50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Surround back:
50 W + 50 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.)
70 W + 70 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)
Output connectors: 6 – 8 Ω/ohms
• Analog
Input sensitivity/Input impedance:
130 mV/47 kΩ/kohms
Frequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)
S/N: 98 dB (IHF–A weighted, DIRECT mode)
n Video section
• Standard video connectors
Input/output level and impedance: 1 Vp-p, 75 Ω/ohms
Frequency response:
5 Hz – 10 MHz — 0, –3 dB
• Color component video connector
Input/output level and impedance: Y signal — 1 Vp-p, 75 Ω/ohms
P / C
B
P / C
R
Frequency response: 5 Hz – 60 MHz — 0, –3 dB
DVD
signal — 0.7 Vp-p, 75 Ω/ohms
B
signal — 0.7 Vp-p, 75 Ω/ohms
R
n Tuner section
(Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W)
Receiving Range: 87.5 MHz – 107.9 MHz
Usable Sensitivity: 1.2 μV (12.8 dBf)
50 dB Quieting Sensitivity:
MONO
S/N : MONO
STEREO
Total harmonic Distortion: MONO
STEREO
n General
Power supply: AC 120 V, 60 Hz
Power consumption: 220 W
Power consumption in standby mode: 0.2 W
Power consumption in CEC standby
mode: 0.5 W
Power consumption in network
standby mode: 2.7 W
For purposes of improvement, specifications and design are subject to change without notice.
158
[FM] [AM]
520 kHz – 1710 kHz
18 μV
2.8 μV (20.2 dBf)
70 dB (IHF–A weighted, DIRECT mode)
67 dB (IHF–A weighted, DIRECT mode)
0.7 % (1 kHz)
1.0 % (1 kHz)