Table of Contents
Advertisement
Setting the BLUETOOTH sound quality
Change these settings to improve the quality of the outgoing or incoming
call.
Setting item: Call Sound
e
e Further setting items: Vol LV Adj / Type Set
Adjusting the volume (VOL LV Adj)
You can emphasize or weaken the volume level of the Phone call, the ring
tone and the microphone input to fit your own preferences.
Setting contents:
Phone Talk:
-5 ~ +5 dB
Ring Tone:
-5 ~ +5 dB
MIC Gain:
-5 ~ +5 dB
Sound Type setting (Type Set)
Depending on your calling environment, choose one of the settings
below which gives the best sound quality.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1:
Standard Mode (recommended)
TYPE2:
Enhance the noise reduction
TYPE3:
Enhance the echo-cancel
TYPE4:
Enhance both noise reduction and echo-cancel
TYPE5:
Weaken both noise reduction and echo-cancel
Note
•
The functions below are designed to improve the sound quality of the
caller to driver.
Noise reduction: This function can reduce the road noise, but
excessive enhancement may affect the sound quality of calling.
Echo-cancel: This function can reduce the echo noise, but excessive
enhancement may affect the sound quality of calling..
Setting the caller information display/text
message indicator ON/OFF
You can choose whether to use these functions according to the following
setting.
Setting item: Sender ID
e
e Further setting items: Short Message / Telephone
Setting contents:
OFF / ON (Initial setting)
Setting text message indicator ON/OFF
(Short Message)
When it is set to ON, the
indicator blinks for 30 seconds while
receiving a text message. The
indicator remains on if there is an
unread text message on the connected mobile phone.
Note
•
Depending on the mobile phone, this function may not be performed.
•
The text of the message will not be displayed on this unit.
•
When this unit prompts you of a received text message, it is recommended
to read the message after stopping your car in a safe place, rather than
read it immediately through your phone.
Setting the caller information display ON/OFF
(Telephone)
If you want to keep the ID information of the caller from others, set this
item to OFF. While you are dialing a number, telephone name will be
displayed as "No Name". While a call is dialing in or during a call, "NO
Name" will be displayed.
Phone Book Auto Update ON/OFF
You can set whether to update the phone book automatically.
Setting item: PB Update
e
Setting contents:
OFF / ON (Initial setting)
OFF:
The phone book will not update.
ON:
When the mobile phone reconnects with this unit, the phone book
will update.
Changing the Phone book List Order
The phone book is listed alphabetically by the first letter of First or Last
Name.
Listing by First Name is the default but Last Name can be selected.
Setting item: PB Order
e
Setting contents:
First Name (Initial setting) / Last Name
Note
"Waiting" will be displayed while the Phone book order is switching. You
•
can quit the "Waiting" screen to perform other operations by pressing
c when the ordering is still in progress. At this time, the phone book
is not accessible. In addition, the ordering may affect the playback of
Bluetooth Audio.
23
-EN
Hide quick links:
Advertisement
Table of Contents
