Connecting To An External Amplifier; Demonstration; Display Setting; Changing Lighting Colour - Alpine CDA-137EBT Owner's Manual

Cd receiver with advanced bluetooth
Table of Contents

Advertisement

OFF:
When set to OFF, AUX source cannot be selected.
ON* :
Set to ON when a portable device is connected. If
pressed and AUX is selected, the sound of the portable device is
input to the unit.
You can change the AUX Name display when AUX IN is set to
*
ON. Press
when AUX IN is set to ON, and select AUX
s/ENTER
Name by turning the Rotary encoder, then press
that, turn the Rotary encoder to select the desired AUX Name.
Note
Via KCA-410C, up to 2 external devices with RCA output can be
connected. In this case, press SOURCE/a to select AUX mode and then
press
BAND
to select your desired device.

Connecting to an External Amplifier

When an external amplifier is connected, sound quality can be improved
by stopping the power supply of the built-in amplifier.
Setting item: Power IC
e
Setting contents:
OFF / ON (Initial setting)
OFF:
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit's internal amplifier
is turned OFF and can not drive speakers.
ON :
The speakers are driven by the built-in amplifier.
POWER IC OFF:
POWER IC ON:
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Note
No sound is produced by the system when the Power IC is set to OFF

Demonstration

This unit has a demonstration feature for the display.
SOURCE/a
is
Setting item: Demo
e
Setting contents:
Note
. After
s/ENTER
To quit Demo mode, set to Demo OFF.

Display Setting

Display is selected on the setup main menu in step 2.

Changing Lighting Colour

You can change the lighting colour of the unit's buttons.
Setting item: Illumination
e
Setting contents:
Front
Left

Dimmer Control

Front
Right
Set the Dimmer Control to Auto to decrease the illumination brightness
of the unit with the head lights of the vehicle ON.This mode is useful if
Rear
you fell the unit's backlighting is too bright at night.
Left
Rear
Setting item: Dimmer
e
Right
Setting contents:
Speakers

Dimmer Level Setting

Front
In the Dimmer Level setting, three levels are available, the highest level
Right
(Lev3) being the dimmest when the car headlights are on.
Setting item: Dimmer Level
e
Rear
Right
Setting contents:
Rear
Left
Front
Left
OFF (Initial setting) / ON
TYPE1 (Initial setting) / TYPE2 / TYPE3
TYPE 1 :
When the colour of SOURCE/a is blue, the colour of the other is
blue.
TYPE 2 :
When the colour of SOURCE/a is blue, the colour of the other is
red.
TYPE 3 :
When the colour of SOURCE/a is red, the colour of the other is
red.
Auto(lnitial setting)/Manual
Lev1 (Initial setting) / Lev2 / Lev3
19
-EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents