Setting The Auto Pairing With Ipod/Iphone; Setting The Bluetooth Device; Setting The Visible Mode; Setting The Bluetooth Sound Quality - Alpine CDE-163BT Owner's Manual

Setting the Auto Pairing with iPod/iPhone

By setting this item to ON, the unit will auto pair when an iPod/iPhone
is connected to this unit via the USB port.
 Setting item: USB PAIR
Setting contents:
ON (Initial setting) / OFF
OFF:
Turn off the auto pair function.
ON:
Auto pair when an iPod/iPhone is connected to this unit via the
USB port.
Note
• USB Auto-Pairing cannot take place if either device has been paired
previously. Make sure the device name of both has been deleted
from each device.

Setting the Bluetooth Device

Select one of 5 connected Bluetooth compatible devices that you
previously registered.
 Setting item: PAIRED DEV
1
Turn the Rotary encoder to select a Bluetooth compatible
device you want to use (you want to change connection),
and then press ENTER.
2
Turn the Rotary encoder to select "CONNECT", then press
ENTER to connect the selected device.
The connected device is marked with "l". Select "DISCONNECT"
to disconnect this device. Select "CLEAR" when you want to clear
the device from the device list.
Notes
• If the connection is successfully changed, "CONNECTED" is displayed
for 2 seconds and the  indicator lights up, then the display returns to
the SETUP screen.
• If a Smartphone is connected to this unit successfully, the
lights up to show the battery charge of the connected Smartphone. The
indicator blinks as a low level warning. The
when the battery is drained. At this time, the Bluetooth function is
unavailable due to the Smartphone powered off.
• Depending on the connected Smartphone, the
indicator may not be displayed.
• A total of 5 devices can be registered. If a 6th device is registered, the
earliest registered device will be deleted automatically.

Setting the Visible Mode

You can set whether this unit can be recognized or not from a Bluetooth
compatible device.
 Setting item: VISIBLE M
Setting contents:
ON (Initial setting) / OFF
30
-EN

Setting the Bluetooth sound quality

Change these settings to improve the quality of the outgoing or
incoming call.
 Setting item: CALL SOUND
 Further setting items: SOURCE VOL / TYPE SET

Adjusting the volume (SOURCE VOL)

You can adjust the volume level of the Phone call, the ring tone and the
microphone input to fit your own preferences.
Setting contents:
Note
• The initial setting of PHONE TALK / RING TONE / MIC GAIN is 0.

Sound Auto setting (TYPE SET)

Depending on your calling environment, choose one of the settings
below which gives the best sound quality.
Setting contents:
TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5
TYPE1:
TYPE2:
TYPE3:
TYPE4:
TYPE5:
indicator
Note
indicator goes out
• The functions below are designed to improve the sound quality of the
outgoing call.
Noise reduction: This function can reduce the road noise, but excessive
(battery charge),
enhancement may affect the sound quality of the call.
Echo-cancel: This function can reduce the echo, but excessive
enhancement may affect the sound quality of the call.
Setting the caller information display
ON/OFF
You can choose whether to use this function according to the following
setting.
 Setting item: CALLER ID
Setting contents:
ON (Initial setting) / OFF
If you want to keep the ID information of the caller from others, set this
item to OFF. Depending on the stored ID information, "UNKNOWN"
and telephone number will be displayed.
PHONE TALK:
−5 dB ~ +5 dB
RING TONE:
−5 dB ~ +5 dB
MIC GAIN:
−5 dB ~ +5 dB
Standard Mode (recommended)
Enhances the noise reduction
Enhances the echo-cancel
Enhances both noise reduction and echo-cancel
Weakens both noise reduction and echo-cancel