Presetting Stations Automatically; Tuning To Preset Stations; Frequency Search Function; Cd/Mp3/Wma/Aac - Alpine CDA-137EBT Owner's Manual

Cd receiver with advanced bluetooth
Table of Contents

Advertisement

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band is
displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while
the automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to
6 in order of signal strength. When the automatic memory
has been completed, the tuner goes to the station stored in
preset location No.1.
Note
If no stations are stored, the tuner will return to the original station you
were listening to before the auto memory procedure began.

Tuning to Preset Stations

Select the desired band, then press any one of the station
preset buttons (1 through 6) that has your desired radio
station in memory.
The display shows the band, preset number and frequency of the
station selected.

Frequency Search Function

You can search for a radio station by its frequency.
1
Press s/ENTER in Radio mode to activate Frequency
search mode.
2
Turn the Rotary encoder to select the desired frequency.
3
Press s/ENTER to receive the selected frequency.
Note
Press c in the search mode to cancel. Or, the search mode will be
cancelled if no operation is performed for 10 seconds.

CD/MP3/WMA/AAC

SOURCE/
Rotary encoder
/ENTER
/ II
VIEW

Playback

1
Press
(OPEN)
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
When a disc is already inserted, press SOURCE/a to switch to the DISC
mode.
3
While playing back MP3/WMA/AAC, press 1 o or p 2 to select
the desired folder.
1
Pressing and holding
o or p
4
Press w or e to select the desired track (file).
Pressing and holding w or e will fast backward/fast
forward track continuously.
5
To pause playback, press q .
Pressing q again will resume playback.
6
After pressing
(OPEN) to open the front panel, press
eject the disc.
Note
Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
Three-inch (8 cm) CDs can not be used.
Any file protected by DRM (Digital Rights Management) copy protection,
cannot be played back on this unit.
The track display for MP3/WMA/AAC data playback is the file numbers
recorded on the disc.
The playback time may not be correctly displayed when a VBR (Variable
Bit Rate) recorded file is played back.
Press
VIEW
to switch the display. For details, refer to "Displaying the
Text" on page 16.
1
2
4 5
2
will change folders continuously.
9
to
v
-EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents