Demonstration; Setting The Language (Language); Mp3/Wma/Aac; Playing Mp3 Data (Play Mode) - Alpine CDE-114BTi Owner's Manual

Note
• The unit scrolls CD text names, folder names, file names or tag display.

Demonstration

This unit has a demonstration feature for the display.
 Setting item: DEMO
Setting contents:
DEMO ON / DEMO OFF (Initial setting)
Note
• To quit Demo mode, set to DEMO OFF.

Setting the Language (LANGUAGE)

Set the language to be displayed on the unit.
 Setting item: LANGUAGE
Setting contents:
LANGUAGE 1 (Initial setting) / LANGUAGE 2
LANGUAGE 1 :
English, Latin character
LANGUAGE 2 :
Russian, English
Note
• Refer to the table below for the Russian display on this unit.

MP3/WMA/AAC

Playing MP3 Data (PLAY MODE)

This unit can play back CDs containing both CD and MP3/WMA/AAC
data (created in Enhanced CD (CD Extra) format). However, in some
situations, playback of an enhanced CD may be difficult. In this case,
you can select playback of a single session only, containing the CD data.
18
Downloaded from Caradio-Manual.com Manuals
-EN
When a disc contains both CD and MP3/WMA/AAC data, playback
starts from the CD data portion of the disc.
 Setting item: PLAY MODE
Setting contents:
CD-DA (Initial setting) / CDDA/MP3
CD-DA:
Only the CD data in Session 1 can be played back.
CDDA/MP3:
CD data, MP3/WMA/AAC files in mixed mode, and multi-session
discs can be played back.
Note
• Perform this setting before inserting a disc. If a disc has already been
inserted, remove it first.

External Device

Turning Mute Mode On/Off (INT MUTE)

If a device having the interrupt feature is connected, audio will be
automatically muted whenever the interrupt signal is received from the
device.
 Setting item: INT MUTE
Setting contents:
MUTE ON / MUTE OFF (Initial setting)

Connecting to an External Amplifier (POWER IC)

When an external amplifier is connected, sound quality can be
improved by stopping the power supply of the built-in amplifier.
 Setting item: POWER IC
Setting contents:
POW ON (Initial setting) / POW OFF
POW ON :
The speakers are driven by the built-in amplifier.
POW OFF :
Use this mode when the line output of this unit is used to drive an
external amplifier. In this setting, the head unit's internal amplifier
is turned OFF and cannot drive speakers.
POW ON :
SPEAKER
RIGHT FRONT
SPEAKER
RIGHT REAR
SPEAKER
LEFT REAR
SPEAKER
LEFT FRONT
Speakers
Front
right
Rear
right
Rear
left
Front
left