Cover Stitch; Chain Stitch - Bernina Serger Owner's Workbook

Attaching Binding
Fabric ................................................................ pre-quilted fabric, 3" x 6"
................................................. 20" length of wide prefolded bias binding
Needle ...................................................................... 80/12 Sharp or JLx2
Thread ............................................................ 2 or 3 cones serger thread
Presser Foot ..................................................... standard or Cover Stitch
Stitch ................................................................ chainstitch or cover stitch
Cover Stitch Option:
Following the instructions in your owner's manual, thread the serger for

cover stitch.

Wrap the bias binding around one 6" side of the quilted fabric; secure in
place with 505 temporary spray adhesive.
Place the fabric under the needles with the unstitched edge of the
binding even with the inside of the left floating toe, with the quilted fabric
to the left.
Cover stitch the binding to the quilted fabric.
Chain Stitch Option:
Following the instructions in your owner's manual, thread the serger
for chain stitch.
Wrap the bias binding around one 6" side of the quilted fabric; secure
in place with 505 temporary spray adhesive.
Place the fabric under the needles with the unstitched edge of the
binding even with the inside of the left floating toe, with the quilted fabric
to the right.
Chain stitch the binding to the quilted fabric.
Trim and mount the sample.
BERNINA
M Y
ASTERING OUR
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA
Downloaded from www.Manualslib.com
Sergers
®
S 6/2006
ERGERS
©2006 BERNINA
manuals search engine
® of America, Inc.
Mastering
Your
BERNINA
®
Notes
132
® Dealers