Bernina Serger Owner's Workbook page 110

Multi-Purpose Foot with Guide -
Creating & Attaching Corded Piping
Fabric ..........................................mediumweight cotton bias strip, 2" x 8"
................................................................... mediumweight cotton, 3" x 8"
Other .................................................... 12" length of
Needle ............................................................................. 80/12 Universal
Thread ................................................................... 4 cones serger thread
Presser Foot ............................................ Multi-Purpose Foot with Guide
Stitch ............................................................................ 4-thread overlock
Following the instructions in your owner's manual, thread the serger
for a 4-thread overlock stitch using both needles.
Adjust settings for a balanced stitch.
Set stitch length to 3mm.
Attach the Multi-Purpose Foot and Guide following the directions in the
instruction manual for the Multi-Purpose Foot with Guide.
Note: 700D and 800DL also need the Attachment Base.
Place the 3" x 8" fabric under the foot.
Insert the cord into the guide.
Wrap the bias strip around the cord and place the wrapped cord in the
groove under the foot and on top of the other fabric.
Serge, making the covered cord and attaching it to the fabric strip in one
stitching.
Press the seam allowance to the wrong side of the fabric strip.
Mount the sample.
BERNINA
M Y
ASTERING OUR
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA
Downloaded from www.Manualslib.com
Sergers
®
S 6/2006
ERGERS
©2006 BERNINA
manuals search engine
3 / " cotton filler cord
8
® of America, Inc.
Mastering
Your
BERNINA
®
Notes
110
® Dealers