Bernina Serger Owner's Workbook page 122

Mastering
Sergers
Your
BERNINA
®
Mock Flat Felled Seam
Fabric .................................................. mediumweight cotton twill, 4" x 6"
Notes
Needle ...................................................................... 80/12 Sharp or JLx2
Thread ................................................................... 3 cones serger thread
Presser Foot ......................................................................... Cover Stitch
Stitch .............................................................. wide 2-needle cover stitch
Following the instructions in your owner's manual, thread the serger
for cover stitch using thread colors to match the color-coded threading
path on the serger.
Fold the fabric to form a ½" tuck lengthwise through the center of the
fabric.
Center the fabric under the presser foot. Lift the presser foot and
place the fabric completely under the foot, with the bulk of the fold
to the left. Align the folded edge with the inside of the right floating
toe of the presser foot.
Cover stitch, forming a tuck along the edge of the fabric. Serge to the
end of the fabric.
At the end of the stitching, turn the handwheel counterclockwise until the
needles are at their lowest position. Then turn the handwheel clockwise
until the needles are at their highest position to release the threads from
the looper.
Raise the presser foot and carefully remove the work. Cut the thread
using the thread cutter.
Trim and mount the sample.
BERNINA
®
M Y S 6/2006 122
ASTERING OUR ERGERS
©2006 BERNINA ® of America, Inc.
Permission to copy and distribute in printed and electronic formats granted only to Authorized BERNINA ® Dealers
Downloaded from www.Manualslib.com manuals search engine