Memory Switch Settings - Star SM-S301 Hardware Manual

2.5. Memory Switch Settings

1. Change the Memory switch by this operation. (Refer to Table 1).
MODE button : changing Printer MODE status
FEED button : changing OPTION status.
2. [Example] The defaults of the printer are :
Bluetooth/57600 bps/8 Data bit/No Parity/1 stop bit/Density Medium
If a user wants to change the defaults with
RS-232C/9600 bps/7 Data bit/Even Parity/1 stop bit/Density High
u After pressing the MODE button simultaneously, if the ERROR lamp 5 turn
signals MODE button is converted with MODE functions
g You will see the Power lamp twinkles once and the Error lamp twinkles
twice.
g Press the MODE button once and the Error lamp twinkles once.
(The interface mode has set to RS-232C mode.)
u Press FEED button once, Power lamp twinkles twice and Error lamp twin-
kles four times.
g Press the MODE button twice, and the Error lamp twinkles once.
(The baud rate has set to 9,600 bps)
u Press FEED button once, Power lamp twinkles three times and Error lamp
twinkles twice.
g Press MODE button once, Error lamp twinkles once.
(The Data Bit has set to 7 Data bit)
u Press FEED button once, Power lamp twinkles four times and Error lamp
twinkles once.
g Press MODE button twice, Error lamp twinkles three times.
(The parity bit has set to even parity bit.)
- 12 -