Draytek Vigor2860 Series User Manual page 151

Available settings are explained as follows:
Item
Filter
Sessions Control
Quality of Service
Load-Balance Policy
User Management
Description
Select Pass or Block for the packets that do not match with
the filter rules.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Choose the WAN interface for applying Load-Balance
Policy.
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall
rule will be applied to the user/user group/all users specified
here.
Note: When there is no user profile or group profile existed,
Create New User or Create New Group item will appear
for you to click to create a new one.
141 Vigor2860 Series User's Guide