Draytek Vigor2860 Series User Manual page 106

For other settings, refer to Details Page for PPPoE in WAN1.
B r i d g e
B r i d g e
General page lets you set the first channel. As to set the third channel, please click the Bridge
tab to open Bridge configuration page.
Available settings are explained as follows:
Item
Enable
P1 to P6
Click Clear to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click OK to save and exit this page. Or click Cancel to abort
the configuration and exit this page.
Vigor2860 Series User's Guide
VoIP data transmitting and receiving.
IPTV - It can be specified for IPTV only. If you choose
IPTV, the configuration for this VLAN will be effective for
IPTV data transmitting and receiving.
Description
Check this box to enable that channel. Only channel 3 to 8
can be set in this page, for channel 1 to 2 are reserved for
NAT/Route using.
It means the LAN port 1 to 6. Check the box to designate
the LAN port for channel 3 to 8.
96