Draytek Vigor2860 Series User Manual page 119

When you finish the configuration, please click OK to save and exit this page.
D e t a i l s P a g e f o r I P
D e t a i l s P a g e f o r I P
Available settings are explained as follows:
Item
Network Configuration
IP Pool Counts - Enter the maximum number of PCs that
you want the DHCP server to assign IP addresses to. The
default is 50 and the maximum is 253.
Gateway IP Address - Enter a value of the gateway IP
address for the DHCP server. The value is usually as same
as the 1st IP address of the router, which means the router is
the default gateway.
R o u t e d S u b n e t
R o u t e d S u b n e t
Description
Enable/Disable - Click Enable to enable such
configuration; click Disable to disable such configuration.
For Routing Usage,
IP Address - Type in private IP address for connecting to a
local private network (Default: 192.168.1.1).
Subnet Mask - Type in an address code that determines the
size of the network. (Default: 255.255.255.0/ 24)
RIP Protocol Control,
Disable - deactivate the RIP protocol. It will lead to a
stoppage of the exchange of routing information between
routers. (Default)
Enable – activate the RIP protocol.
109 Vigor2860 Series User's Guide