Draytek Vigor2860 Series User Manual page 129

Available settings are explained as follows:
Item
Enable
Disable
Strict Bind
ARP Table
Select All
Sort
Refresh
Add and Edit
IP Bind List
Add
Edit
Delete
Note: Before you select Strict Bind, you have to bind one set of IP/MAC address for one
PC. If not, no one of the PCs can access into Internet. And the web user interface of the
router might not be accessed.
When you finish the configuration, click OK to save the settings.
Description
Click this radio button to invoke this function. However,
IP/MAC which is not listed in IP Bind List also can connect
to Internet.
Click this radio button to disable this function. All the
settings on this page will be invalid.
Click this radio button to block the connection of the
IP/MAC which is not listed in IP Bind List.
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can
be selected and added to IP Bind List by clicking Add
below
.
Click this link to select all the items in the ARP table.
Reorder the table based on the IP address.
Refresh the ARP table listed below to obtain the newest
ARP table information.
IP Address – Type the IP address that will be used for the
specified MAC address.
Mac Address – Type the MAC address that is used to
bind with the assigned IP address.
Comment – Type a brief description for the entry.
Show Comment – Check this box to display the comment
on IP Bind List box.
It displays a list for the IP bind to MAC information.
It allows you to add the one you choose from the ARP table
or the IP/MAC address typed in Add and Edit to the table
of IP Bind List.
It allows you to edit and modify the selected IP address and
MAC address that you create before.
You can remove any item listed in IP Bind List. Simply
click and select the one, and click Delete. The selected item
will be removed from the IP Bind List.
119 Vigor2860 Series User's Guide