Connecting The Speakers - JVC FS-SD58V Instructions Manual

CAUTION:
• Make all connections before plugging the System into an AC power outlet.

Connecting the Speakers

1. Open each of the terminals to connect the speaker wire leads.
2. Connect the speaker cords between the Speaker terminals of the Unit and the terminals of the Speakers.
Connect the cords with a black line to the (–) terminals and cords without a black line to the (+) terminals.
3. Close each of the terminals to securely connect the cords.
Right side (rear view)
• Since both speakers are the same, you can put either one to the right or left side.
Removing the speaker grilles
The speaker grilles can be removed.
When removing:
1. Pull the top forwards you with your fingers.
2. Also pull the bottom towards you.
• When removing the speaker grille from the SP-SD98V's
speaker, be careful not to damage the cabinet.
When attaching the speaker grille:
Marked with a black line
SPEAKERS IMPEDANCE 4 16
R L
Left side (rear view)
(SP-SD58V)
(SP-SD78V and SP-SD98V)
(SP-SD58V)
(SP-SD78V and SP-SD98V)
Speaker
grille
Getting Started
Speaker
grille
6