Connecting The Speakers (Sp-Fsx1/Sp-Fsx3) - JVC FS-X3 Instructions Manual

Ge_mgS_ed
Connecting the Speakers (SP.FSX1/SP.FSX3)
These speakers are exclusively for this system. Using with other devices will damage the speakers.
Connect 1he speaker cords between the speaker terminals of the Unit anti those of the Speakers.
• When inserting the speaker wire lead, open the speaker terminal.
• Connect the black cord to the ( - ) terminal and the cord without a black line to the (+) terminah
Right side (rear view)
Left side (rear view)
SP-FSX1
___ 1 SP-FSX1
K
SPEAKER terminal description
8PEAI_R8
IMPEDANCE M IN4x3
(on the side panel)
SP-FSX3
A
f
SP-FSX3
SPEAKERterminal description
SPEAKERS
IMPEDANCE M IN4Q
(on the side panel)
• Since both speakers are the same, you can put either one to the right or left side
• Do not connect other speakers to the Unit. The difference of the load impedance causes failures
• Do not use the supphed speakers in parallel with other speakers.
CAUTION:
• A TV may display irregular colors if located near the speakers. If this happens, set the speak-
ers away from the TV.