Panasonic KX-NCP Series Quick Reference Manual page 35

2.
When you start CA Client for the first time, the screen below is displayed.
Select the display language, and enter your international call access number and international area code.
You must enter your international area code in order to proceed.
Select your operating mode:
•
Standard user (CA Pro): Log in using Pro mode.
•
Standard user (CA Basic-Express): Log in using Basic-Express mode.
•
Operator Console (CA Operator): Log in using Operator Console mode.
•
ICD Group Supervisor (CA Supervisor): Log in using Supervisor mode.
Note
See Feature Comparison (Page 24) for a summary of the different modes.
Check the following features to use them in CA Client:
•
Use softphone: The IP Softphone will load automatically each time CA Client is started. An IP
Softphone activation key for your extension is required to use this feature.
•
Use Network: Enable the additional connectivity and features offered by CA Server. CA Server and a
network activation key are required to use this feature.
3.
Click Save.
4.
Enter an IP address and port number according to the kind of connection to be used:
•
Stand-alone PBX
Enter the IP address and port number of the PBX.
•
One-look KX-NS1000 PBX Network (without CA Server)
Enter the IP address and port number of the Master unit PBX of the One-look network.
•
CA Server connection
Enter the CA Server IP address and port number.
4.2 Installing and Starting CA Client
Quick Reference Guide 35